USAfixTM - Repair Guide (RG) - Master

Email RG

- Clean the Sinter Bushing

Level of Difficulty - LOW	Estimated Completion Time - 5 minutes
TASKI - FG 2C
	Tools Required
	Parts Required

Step   Procedure & Parts & Tools 1 TURN THE CAP BY HAND TO LOOSEN THE SINTER BUSHING 2 REMOVE THE SINTER BUSHING FROM THE MACHINE AND RINSE UNDER WATER TO REMOVE DEBRIS. REINSTALL BUSHING IN MACHINE. NOTE: TIGHTEN THE CAP BY HAND UNTIL SNUG. DO NOT OVER TIGHTEN AS THIS WILL CAUSE THE BUSHING TO BREAK.